Ukrainian manufacturer for indomitable Ukrainians
  • ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–2]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–3]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–4]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–5]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–6]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–7]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–8]
    ΠšΡƒΠΏΠΈΡ‚ΡŒ Mattress EXTRA Chrome Π² ΠΈΠ½Ρ‚Π΅Ρ€Π½Π΅Ρ‚-ΠΌΠ°Π³Π°Π·ΠΈΠ½Π΅ Π‘ome-For [Ρ„ΠΎΡ‚ΠΎ β„–9]
  • Mattress thickness
    Mattress thickness
    One-bed load
    One-bed load
    Warranty service
    Warranty service
    Single-zone springs system
    Single-zone springs system
     Firmness type: hard - extra hard
    Firmness type: hard - extra hard
    Single zone spring system
    Single zone spring system

The EXTRA Chrome double-sided mattress is reliable in every millimeter. It is based on the Pocket Spring Extra independent spring unit with increased compression. Euroframe reinforces the perimeter and increases the service life of the product. The thermal fibers distribute the pressure of the springs, coconut coir makes one side more rigid and creates the desired orthopedic and anatomical effect. Aeroset sewn in the perimeter provides ventilation of all layers, the total height of which is 22 cm. The maximum load on the sleeping place is 160 kg. The product is guaranteed for 5 years and the spring block for 10 years.

Mattress base:

Pocket Spring Extra

Reinforced spring block with a spring compression rate of up to 44%, which is 2.2 times higher than that of a standard spring. This unit is stiffer than the classic Pocket Spring and withstands a load 1.5 times higher, distributing it over the entire length of the wire. The required stiffness is made possible thanks to the high return resistance. One bed of this mattress can support up to 160 kg. The Pocket Spring Extra unit is guaranteed for 10 years.

Π‘oconut coir

Environmentally friendly, hypoallergenic, breathable material. Latexing makes the material elastic, flexible and resistant to deformation. Latex allows the coir block not to crumble or fall apart. If you are looking for a mattress with increased firmness, but at the same time elastic, pay attention to the model with coir.

Aerocell

Multilayer material designed for free air movement. It is positioned around the perimeter of the mattress, creating a uniform, intensive aeration. Free air exchange is possible thanks to the Air Flow technology: the air mesh is in direct contact with the mattress frame or topper, which means that aeration is not hindered by the fabric. The presence of an air mesh is a guarantee of comfort and hygiene.

Thermofoil

A 3-4 mm thick insulating layer that separates the spring unit from the materials. Thanks to its density and strength, thermofoil controls the same spring pressure on the human body over the entire surface of the mattress. This makes the mattress more comfortable and maintains the right level of firmness. The composition of thermo-fiber is a combination of natural and regenerated fabric fibers, joined by temperature and pressure. The material is environmentally friendly and hypoallergenic.

Contour 360

A frame developed by Come-for in response to customers' wishes for the most durable and long-lasting mattress possible. The 360 contour protects the shape of the mattress, increases the reliability of the perimeter by restraining external and internal pressure. The width of this frame is 60% larger than the classic frame (increased from 50 to 80 mm). This increases its reliability and mattress life, preserving its shape and characteristics longer.

Multilayer quilting

A bedding stitching technology that has allowed us to reduce the amount of glue in our mattresses by 37%. Unlike standard sequential layer stitching technology, multilayer quilting eliminates the use of glue in the top layers. This method of stitching the bedding layers together with the fabric additionally gives the mattress a premium lushness, firmness and attractive appearance.

Hot melt

Technology of bonding decking layers with hotmelt adhesive. The adhesive melted in a special container is pressurized into an industrial gun and then evenly sprayed in the form of a spider web. The glue used by Come-for is environmentally friendly, odorless and safe for your health.

Knitted fabric in Come-for mattresses

High-quality textile produced in a Turkish factory and meeting high quality requirements. It captivates with its incredibly pleasant texture and proves the right choice with its excellent wear resistance. It does not wrinkle, is not prone to abrasion and fading. And thanks to its high breathability, it offers the same comfortable feeling in winter and summer, regardless of the temperature and humidity in the room.
Β 

Syntepon

Non-woven material with a voluminous, lush structure. Syntepon combines softness and durability and is used as a filler in the production of quilted fabric, thereby increasing the softness of the product.

Spunbond

Non-woven artificial material in a wide range of colors. It combines strength, lightness, durability and breathability. It is because of these qualities that we use spunbond for the Pocket Spring unit. Individual covers are made of this material, which protect the springs and ensure the main feature of Pocket Spring - even distribution of the load on the back. Spunbond has good thermal insulation, so it is used for covering mattress surfaces and sewing removable covers.

The EXTRA Chrome mattress is a must-have if you can't fall asleep on a soft surface. It will create optimal firmness, while relaxing your muscles and ensuring a comfortable sleep. With this mattress you will forget what it means not to sleep well. After all, by ensuring the correct position of the body, you will regenerate your energy during sleep.

Β 

Certificate of Conformity

Π‘Π΅Ρ€Ρ‚ΠΈΡ„ΠΈΠΊΠ°Ρ‚

Β 
Main features
1-bed load Up to 160 kg
Firmness Extra Firm, Firm
Mattress thickness (tolerance +/-10mm) 22 cm
Type Pocket spring, Innerspring mattresses
Warranty 5 Ρƒears
Features
Air Flow Ventilation Yes
Anatomical effect Yes
Coir Yes
Composition Aero grid, Coir, Foam encasement, Multi-layer quilting, Synthepone, Spunbond, Thermofelt, Knitted Mattress Ticking, Pocket Spring, Hot Melt
Features Orthopedic, Anatomical
Fix Force Thermoplayer Yes
Kevlar Fabric Yes
Multi Sense Technology Yes
Multi-layer quilting Yes
Number of berths Single, Double, Small Double
Number of firmness zones 1 zone
Orthopaedic effect Yes
Pocket Spring eXtra spring block Yes
Price segment Medium Class
Product category Mattresses
Quilting with reinforced thread Yes
Reinforced foam encasement "Circuit 360" Yes
Reinforced quilting Yes
Spinal support Orto+ Yes
Stress Free Technology Yes
Type Two-sided
Weight per 1 mΒ² 12,3

The EXTRA Chrome double-sided mattress is reliable in every millimeter. It is based on the Pocket Spring Extra independent spring unit with increased compression. Euroframe reinforces the perimeter and increases the service life of the product. The thermal fibers distribute the pressure of the springs, coconut coir makes one side more rigid and creates the desired orthopedic and anatomical effect. Aeroset sewn in the perimeter provides ventilation of all layers, the total height of which is 22 cm. The maximum load on the sleeping place is 160 kg. The product is guaranteed for 5 years and the spring block for 10 years.

Mattress base:

Pocket Spring Extra

Reinforced spring block with a spring compression rate of up to 44%, which is 2.2 times higher than that of a standard spring. This unit is stiffer than the classic Pocket Spring and withstands a load 1.5 times higher, distributing it over the entire length of the wire. The required stiffness is made possible thanks to the high return resistance. One bed of this mattress can support up to 160 kg. The Pocket Spring Extra unit is guaranteed for 10 years.

Π‘oconut coir

Environmentally friendly, hypoallergenic, breathable material. Latexing makes the material elastic, flexible and resistant to deformation. Latex allows the coir block not to crumble or fall apart. If you are looking for a mattress with increased firmness, but at the same time elastic, pay attention to the model with coir.

Aerocell

Multilayer material designed for free air movement. It is positioned around the perimeter of the mattress, creating a uniform, intensive aeration. Free air exchange is possible thanks to the Air Flow technology: the air mesh is in direct contact with the mattress frame or topper, which means that aeration is not hindered by the fabric. The presence of an air mesh is a guarantee of comfort and hygiene.

Thermofoil

A 3-4 mm thick insulating layer that separates the spring unit from the materials. Thanks to its density and strength, thermofoil controls the same spring pressure on the human body over the entire surface of the mattress. This makes the mattress more comfortable and maintains the right level of firmness. The composition of thermo-fiber is a combination of natural and regenerated fabric fibers, joined by temperature and pressure. The material is environmentally friendly and hypoallergenic.

Contour 360

A frame developed by Come-for in response to customers' wishes for the most durable and long-lasting mattress possible. The 360 contour protects the shape of the mattress, increases the reliability of the perimeter by restraining external and internal pressure. The width of this frame is 60% larger than the classic frame (increased from 50 to 80 mm). This increases its reliability and mattress life, preserving its shape and characteristics longer.

Multilayer quilting

A bedding stitching technology that has allowed us to reduce the amount of glue in our mattresses by 37%. Unlike standard sequential layer stitching technology, multilayer quilting eliminates the use of glue in the top layers. This method of stitching the bedding layers together with the fabric additionally gives the mattress a premium lushness, firmness and attractive appearance.

Hot melt

Technology of bonding decking layers with hotmelt adhesive. The adhesive melted in a special container is pressurized into an industrial gun and then evenly sprayed in the form of a spider web. The glue used by Come-for is environmentally friendly, odorless and safe for your health.

Knitted fabric in Come-for mattresses

High-quality textile produced in a Turkish factory and meeting high quality requirements. It captivates with its incredibly pleasant texture and proves the right choice with its excellent wear resistance. It does not wrinkle, is not prone to abrasion and fading. And thanks to its high breathability, it offers the same comfortable feeling in winter and summer, regardless of the temperature and humidity in the room.
Β 

Syntepon

Non-woven material with a voluminous, lush structure. Syntepon combines softness and durability and is used as a filler in the production of quilted fabric, thereby increasing the softness of the product.

Spunbond

Non-woven artificial material in a wide range of colors. It combines strength, lightness, durability and breathability. It is because of these qualities that we use spunbond for the Pocket Spring unit. Individual covers are made of this material, which protect the springs and ensure the main feature of Pocket Spring - even distribution of the load on the back. Spunbond has good thermal insulation, so it is used for covering mattress surfaces and sewing removable covers.

The EXTRA Chrome mattress is a must-have if you can't fall asleep on a soft surface. It will create optimal firmness, while relaxing your muscles and ensuring a comfortable sleep. With this mattress you will forget what it means not to sleep well. After all, by ensuring the correct position of the body, you will regenerate your energy during sleep.

Β 

Certificate of Conformity

Π‘Π΅Ρ€Ρ‚ΠΈΡ„ΠΈΠΊΠ°Ρ‚

Β 
Main features
1-bed load Up to 160 kg
Firmness Extra Firm, Firm
Mattress thickness (tolerance +/-10mm) 22 cm
Type Pocket spring, Innerspring mattresses
Warranty 5 Ρƒears
Features
Air Flow Ventilation Yes
Anatomical effect Yes
Coir Yes
Composition Aero grid, Coir, Foam encasement, Multi-layer quilting, Synthepone, Spunbond, Thermofelt, Knitted Mattress Ticking, Pocket Spring, Hot Melt
Features Orthopedic, Anatomical
Fix Force Thermoplayer Yes
Kevlar Fabric Yes
Multi Sense Technology Yes
Multi-layer quilting Yes
Number of berths Single, Double, Small Double
Number of firmness zones 1 zone
Orthopaedic effect Yes
Pocket Spring eXtra spring block Yes
Price segment Medium Class
Product category Mattresses
Quilting with reinforced thread Yes
Reinforced foam encasement "Circuit 360" Yes
Reinforced quilting Yes
Spinal support Orto+ Yes
Stress Free Technology Yes
Type Two-sided
Weight per 1 mΒ² 12,3

Related Products

Product from this category

Mattress thickness
Mattress thickness
One-bed load
One-bed load
Warranty service
Warranty service
Single-zone springs system
Single-zone springs system
 Firmness type: hard - extra hard
Firmness type: hard - extra hard
Single zone spring system
Single zone spring system

19 years of creating comfortable vacations

official online store

custom size mattress production

warranty and service support

loyalty program

online chat with our expert

Last Viewed

Sign up to be the first to learn about our new products, promotions and discounts

ООО "КОМ-ЀОР" - матрасы ΠΈ Ρ‚ΠΎΠ²Π°Ρ€Ρ‹ для сна 0 800 301 307 Come-For https://come-for.com/image/catalog/logo.svg
ΡƒΠ». БСлгородская, 5 62370 ΠΏΠ³Ρ‚ Π‘ΠΎΠ»ΠΎΠ½ΠΈΡ†Π΅Π²ΠΊΠ°, Π₯Π°Ρ€ΡŒΠΊΠΎΠ²ΡΠΊΠ°Ρ ΠΎΠ±Π»., Π£ΠΊΡ€Π°ΠΈΠ½Π°